Where: GoDaddy terminal
Most power problems are a flat battery, a loose cable, or a stuck screen.
Before you start
- Use the power cord that came in the box.
- Try a different wall outlet.
Steps (GoDaddy terminal)
- Duo.
- Wait until the merchant screen is fully blank.
- Hold the power button on the back of the merchant screen for 3 seconds.
- If it does not start, place it in the dock, check the dock is plugged in, and charge for about an hour.
- Flex.
- Power off and unplug.
- Open the battery cover and press the battery plug in firmly, then close it.
- Check the USB-C cord and outlet.
- Charge for about 2.5 hours.
- Hold the side power button about 3 seconds.
- If the terminal turns on but freezes, hold the power button until it goes dark, leave it off for 30 seconds, then start it again.
Tips
- A Duo V3.0 shows a green light when it is fully charged.
- If the terminal has been unplugged for a long time, charge it before you decide it is broken.
Troubleshooting
- If it still will not turn on after a full charge, contact the Cutflow team. If the terminal is in warranty, a replacement may be possible. See Return or replace a GoDaddy terminal.
- If the dock does not charge a Duo, the Duo and dock are sold as one unit, so both are covered together.