A GoDaddy terminal will not read a card

Where: GoDaddy terminal

If cards are not reading, work through the card, the way it is presented, and then a restart. If most cards fail, it is likely a terminal problem and you should call for help.

Before you start

  • Read the message on the screen. It may say Card not detected, Re-insert card, or Reset terminal.
  • Try a second card to see if the problem is the card.

Steps (GoDaddy terminal)

  1. Chip card. Insert the chip end first with the front facing up, into the slot above the payment screen. Keep it there until the screen says to remove it.
  2. Swipe. Duo V2.0: front up, stripe on the right, insert slowly into the slot above the payment screen, and pull out quickly. Duo V3.0: swipe through the horizontal groove above the customer screen, stripe toward the device, in one smooth motion.
  3. Tap. Duo V2.0 and Duo V3.0 with the NFC icon on screen: tap the customer-facing screen. Duo V3.0 with the NFC icon printed on the device: tap the icon below the customer screen. Hold the card or phone close until it finishes. The Duo version is printed on the back.
  4. Restart. Flex: hold the power button about 30 seconds with power connected, then let it start. Duo: hold the power button until the screen goes dark, leave it off at least 30 seconds, then hold it 3 seconds.
  5. Try the card again.
  6. If a card still cannot be read, use a different payment method or a keyed-in sale if your setup allows it.

Tips

Troubleshooting

Related

Tags